sboat
5
1 / 14
◀
▶
◀
▶
1 / 14
x
◀
▶
SWAGGER is a 37-metre performance sloop built in 2006 by Holland Jachtbouw to a design by British naval architect Bill Dixon, with an interior by John Munford. Alustar hull and superstructure, teak deck, carbon Marten Spars rig with furling main boom: she was conceived from the outset as a fast, ocean-capable cruising yacht that a professional crew can handle with ease. She previously sailed as A SULANA.
Her hull was optimised through tank testing, with a keel and ballast bulb tuned for lift, stability and efficiency, and her systems positioned with weight distribution in mind. Twin helms port and starboard give excellent visibility forward, with the captive mainsheet and furler controls within reach at each console and the headsail winches close by, so calls on trim can be made without disturbing guests in the sunken centre cockpit. Her sail plan pairs a non-overlapping Blade jib for power and ease of handling with a Genoa Reacher on the outer headstay for lighter airs, all in North Sails 3Di.
On deck she is uncluttered and almost minimalist: a low-profile deckhouse, deck-recessed genoa tracks, semi-recessed headsail furlers, a through-hull anchor system and concealed hatch hinges. Two large awnings deploy from the boom over an ample sunbathing terrace, and a fully automatic retractable bimini and dodger shelter the centre cockpit seating and dining area under way. A substantial aft boarding platform opens onto the water, and a fully articulated Hydromar passerelle keeps boarding easy whatever the swell.
Below, the raised saloon uses the full beam: a large low seating area to port, a formal dining table to starboard and a bar, finished in pear and wenge woods with fabric and leather. The owner’s suite and two guest cabins sit forward, separated from the crew area aft by the saloon. The owner’s cabin has two double beds set outboard, a central desk and vanity, and his-and-hers access forward to the en suite head and shower; the twin guest cabins are set either side of the mast, with a Pullman berth allowing three guests to share one cabin when required.
ACCOMMODATION
7 guests in 3 cabins, all with en suite facilities, plus a Pullman berth. 5 crew accommodated aft with their own service access.
RIG AND SAILS
Sloop rig by Marten Spars (now Southern Spars): carbon mast and carbon furling main boom, Marten Leisure Furl mainsail furling, Reckmann headsail furlers. North Sails 3Di - mainsail 370 m2, Reacher 457 m2, Blade jib 298 m2, MPS 956 m2. Lewmar deck and captive winches. Hydraulic system upgraded 2020 to MHC PLC control.
MACHINERY
Scania DI13, 550 hp at 1,800 rpm unrestricted, new 2024 to Lloyd’s, fully refitted ZF gearbox (2024), new Brunton Lloyd’s shaft and new Brunton Varifold propeller. Two Northern Lights 45 kW generators, fully refitted 2024 with one-year guarantee. Lewmar Bow 500 SVTAH 51 kW and Stern 400 SVTAH 34 kW retractable thrusters. 12 knots max, 11 knots cruising, 2,700 NM at 10 knots. Fuel 14,000 l, water 4,000 l.
SYSTEMS
HEM water makers (overhauled 2023), Hamann Wassertechnik sewage treatment with 750 l black and grey water, Condaria air conditioning, De Keiser ACMS PLC monitoring, Tyco Novec 1230 fire control, Hydromar passerelle, STARLINK and VSAT, SONOS and Flare Tech entertainment.
REFIT HISTORY
2016/17 - hull and superstructure repainting, new teak decks with grey caulking, standing rigging refit, complete air conditioning plant replacement, galley refit, owner’s office conversion, B&G system replacement, main engine and gearbox service, all six cylinder liners replaced, ten-year survey completed.
2021/22 - complete main engine overhaul, extensive generator servicing, mast removed with all rod rigging and terminations NDT tested, D1/D2 delamination repaired by RigPro, propulsion shaft replaced and hub, blades and shaft dynamically balanced, black and grey water systems overhauled, sea chest and manifold overhauled, bilge and fire pumps overhauled, watermaker overhauled, rudder delamination repaired, 90% of through-hull valves replaced.
2023/24 - new North 3Di blade, two mast cylinders refitted, shore power refit, all winches overhauled, new rudder lower bearing, new Scania DI13 main engine, full ZF gearbox refit, new Brunton shaft and Varifold propeller, full refit of both generators, new starter batteries, new freezer, new boilers, Starlink installation, new antifouling, LSA safety equipment serviced.
CLASSIFICATION
Lloyd’s 100A1, SSC, Yacht, Mono, G6, LMC. MCA commercial operations 150 NM from a safe haven. Private registration, United Kingdom flag. RRMA survey report available on request.
TENDER AND TOYS
Castoldi JT 14 RIB with 110 hp diesel jet and bimini with limo enclosure. Inflatable kayaks, Seabob and waterskis.
She lies in Vilanova i la Geltru, Spain, and is offered Ex VAT.
Details given in good faith with no guarantee nor warranty for accuracy or condition. A buyer should instruct his surveyor to investigate such details as he desires validated. This is not a contractual document.… » whole text » less text
Her hull was optimised through tank testing, with a keel and ballast bulb tuned for lift, stability and efficiency, and her systems positioned with weight distribution in mind. Twin helms port and starboard give excellent visibility forward, with the captive mainsheet and furler controls within reach at each console and the headsail winches close by, so calls on trim can be made without disturbing guests in the sunken centre cockpit. Her sail plan pairs a non-overlapping Blade jib for power and ease of handling with a Genoa Reacher on the outer headstay for lighter airs, all in North Sails 3Di.
On deck she is uncluttered and almost minimalist: a low-profile deckhouse, deck-recessed genoa tracks, semi-recessed headsail furlers, a through-hull anchor system and concealed hatch hinges. Two large awnings deploy from the boom over an ample sunbathing terrace, and a fully automatic retractable bimini and dodger shelter the centre cockpit seating and dining area under way. A substantial aft boarding platform opens onto the water, and a fully articulated Hydromar passerelle keeps boarding easy whatever the swell.
Below, the raised saloon uses the full beam: a large low seating area to port, a formal dining table to starboard and a bar, finished in pear and wenge woods with fabric and leather. The owner’s suite and two guest cabins sit forward, separated from the crew area aft by the saloon. The owner’s cabin has two double beds set outboard, a central desk and vanity, and his-and-hers access forward to the en suite head and shower; the twin guest cabins are set either side of the mast, with a Pullman berth allowing three guests to share one cabin when required.
ACCOMMODATION
7 guests in 3 cabins, all with en suite facilities, plus a Pullman berth. 5 crew accommodated aft with their own service access.
RIG AND SAILS
Sloop rig by Marten Spars (now Southern Spars): carbon mast and carbon furling main boom, Marten Leisure Furl mainsail furling, Reckmann headsail furlers. North Sails 3Di - mainsail 370 m2, Reacher 457 m2, Blade jib 298 m2, MPS 956 m2. Lewmar deck and captive winches. Hydraulic system upgraded 2020 to MHC PLC control.
MACHINERY
Scania DI13, 550 hp at 1,800 rpm unrestricted, new 2024 to Lloyd’s, fully refitted ZF gearbox (2024), new Brunton Lloyd’s shaft and new Brunton Varifold propeller. Two Northern Lights 45 kW generators, fully refitted 2024 with one-year guarantee. Lewmar Bow 500 SVTAH 51 kW and Stern 400 SVTAH 34 kW retractable thrusters. 12 knots max, 11 knots cruising, 2,700 NM at 10 knots. Fuel 14,000 l, water 4,000 l.
SYSTEMS
HEM water makers (overhauled 2023), Hamann Wassertechnik sewage treatment with 750 l black and grey water, Condaria air conditioning, De Keiser ACMS PLC monitoring, Tyco Novec 1230 fire control, Hydromar passerelle, STARLINK and VSAT, SONOS and Flare Tech entertainment.
REFIT HISTORY
2016/17 - hull and superstructure repainting, new teak decks with grey caulking, standing rigging refit, complete air conditioning plant replacement, galley refit, owner’s office conversion, B&G system replacement, main engine and gearbox service, all six cylinder liners replaced, ten-year survey completed.
2021/22 - complete main engine overhaul, extensive generator servicing, mast removed with all rod rigging and terminations NDT tested, D1/D2 delamination repaired by RigPro, propulsion shaft replaced and hub, blades and shaft dynamically balanced, black and grey water systems overhauled, sea chest and manifold overhauled, bilge and fire pumps overhauled, watermaker overhauled, rudder delamination repaired, 90% of through-hull valves replaced.
2023/24 - new North 3Di blade, two mast cylinders refitted, shore power refit, all winches overhauled, new rudder lower bearing, new Scania DI13 main engine, full ZF gearbox refit, new Brunton shaft and Varifold propeller, full refit of both generators, new starter batteries, new freezer, new boilers, Starlink installation, new antifouling, LSA safety equipment serviced.
CLASSIFICATION
Lloyd’s 100A1, SSC, Yacht, Mono, G6, LMC. MCA commercial operations 150 NM from a safe haven. Private registration, United Kingdom flag. RRMA survey report available on request.
TENDER AND TOYS
Castoldi JT 14 RIB with 110 hp diesel jet and bimini with limo enclosure. Inflatable kayaks, Seabob and waterskis.
She lies in Vilanova i la Geltru, Spain, and is offered Ex VAT.
Details given in good faith with no guarantee nor warranty for accuracy or condition. A buyer should instruct his surveyor to investigate such details as he desires validated. This is not a contractual document.… » whole text » less text
Holland Jachtbouw 37m Custom Sloop
Price
€ 6,850,000
VAT excl.
VAT excl.
Boat ID
s314562
Model
Holland Jachtbouw 37m Custom Sloop
Boat builder
Holland Jachtbouw
Designer
Dixon Yacht Design
Boat name
SWAGGER
Boat type
sailboat
Boat category
sloop, sailing yacht, mega yacht (sailing)
Category
used boat
Year built
2006
Refit year
2026
Launched
2006
Condition
as new
Hull material
aluminium
Steering
two steering wheels
Location
Spain, Vilanova I la Geltru
Flag
Great Britain
Registration type
private
Keel type
bulb keel
Mast material
carbon
Sail area
668 m² (7,190 sq ft)
Main sail
370 m² (3,983 sq ft)
Jib
298 m² (3,208 sq ft)
Gennaker
956 m² (10,290 sq ft)
Technical data
Length
37 m (121 feet)
Beam
8.15 m (26.7 feet)
Draught
4.27 m (14 feet)
Cabins
3
- thereof Guest cabins
3
berths
7
Heating
heating with air cond.
Displacement
ca. 154,000 kg
Ballast
46,000 kg
Cruis. speed
11 kn
Max. speed
12 kn
Water tank
4,000 ltr
Fuel tank
14,000 ltr
Black water tank
750 ltr
Propulsion
shaft drive
Engine range
2,700 nmi
Propeller
folding propeller
Propeller brand
Brunton Varifold
Engine
Engine 1
Engine type
inboarder
Model
Scania DI13
Power
550 hp (405 kW)
Fuel
diesel
Year built engine
2024
2/4 strokes
four-stroke engine
Equipment [ + ]
Technical equipment
wetbar, watermaker, warm water system, underwater paint, thruster - stern thruster, shore supply 220V, pressurized water system, position lights, main circuit breaker, holding tank, generator, thruster - bow thruster, anchor windlass bow, bilge pump, battery charger, battery, anchor, air conditioning, 220V plugs, 12V plugs
Deck equipment
teak deck, teak cockpit, suncushion, stern rail, pushpit, pulpit, guard rail, gangway, fenders, dinghy with motor, deck hatch, bathing platform, bathing ladder
Interior equipment
heating, freezer, cockpit table
Entertainment instruments
TV, satellite phone, satellite internet, internet
Safety
life raft, life jackets, fire extinguisher system, fire extinguisher, distress signals
Persennings
sun shade, sprayhood, bimini top
Sails
mainsail roller-furling, roller-furling genoa, jib, gennaker
Layout of the boat - cabins
separate crew cabine, salon, entrance: rear entrance, owner cabin, steering position outside, head, guest cabin
Contact data

Contact:
Bernard Gallay Yacht Brokerage
Mr. Bernard Gallay
1 Rue Barthez
34000 Montpellier
France
Mr. Bernard Gallay
1 Rue Barthez
34000 Montpellier
France
Phone:
+33 4 67 66 39 93
Languages:
English, French
http://www.bernard-gallay.com/yacht-sales-search
x
OK













